Emissions Current Probes compliance testing your facility up to 1 Hz. It is ideal solution for performing pre- compliance EMC testing from 9 kHz- 1GHz. They are essential equipment required for radiated and conducted antenna tripod. Pre-compliance testing in EMC is widely used term which implies testing done prior to formal testing for legal compliance. Such facility & instrumentation is capital intensive and can be Emissions Current Probes are expensive even to rent and not easily available. Often it is required to know prior to accordance testing at such facility, whether a product is close to compliance and also how close.
Test System Includes:
Feature
Specification
Frequency Range | 10 kHz to 400 MHz |
Window (Aperture) Diameter | 1.25" (32 mm) |
Outside Diameter | 2.83" (72 mm) |
Height | 0.76" (19.3 mm) |
Weight | 0.275 lbs. (0.125 kg) |
Connector | Type-N (Female) |
Transfer impedance (ZtΩ) | 7Ω* |
Transfer impedance (dBΩ) | -21 to 17 dBΩ (typical)* |
Max Primary Current (DC-400 Hz) | 100 Amps |
Max Primary Current (RF) | 4 Amps |
Max. Core Temperature | 248℃F (120°C) |
|
|
![]() |
COM-POWER CORPORATION
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Ltd. |