Cookie Img
Mobile : +17146004253
Home » Products » Coupling - Decoupling Networks » Coupling - Decoupling Networks -M125E

Coupling - Decoupling Networks -M125E

Coupling - Decoupling Networks -M125E
Coupling - Decoupling Networks -M125E
Send Inquiry
Product Code : 01
Product Description

Coupling - Decoupling Networks -M125E is mainly used for RF conducted immunity testing  according to IEC 61000-4-6, which is one of the phenomenon tests mainly required for “CE-mark” compliance testing of commercial products.  Coupling network is used for transferring energy from one circuit to another with a defined impedance. Whereas, de coupling network is used for for preventing test signals useful to the EUT from affecting different devices, equipment or systems that are not under test. Not like other coupling/decoupling devices, Coupling - Decoupling Networks -M125E must be connected in series with the line(s) under test.

  • Product Name: Coupling Decoupling Network (CDN)
  • Compliant Test Standards: IEC / EN 61000-4-6
  • Application: Single conductor power cable
  • Frequency Range: 150 kHz to 230 MHz
  • RF Input Voltage: 40 V (Max)
  • RF Input Connector: 50 Ω BNC (Female)
  • Voltage Rating: 250 V AC / 350 V DC (Line to Ground)
  • Current Rating: 25 Amps AC / 17 Amps DC (Max)
  • AE and EUT Connections: 4 mm shrouded banana sockets
  • Common Mode Impedance:
  • 150 kHz - 26 MHz: 150Ω ± 20Ω
  • 26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω
  • 80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω
  • Voltage Division Factor: 9.5 dB +4 / -1
  • Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)
  • Dimensions: 6 x 6 x 13 inches or 15.2 x 15.2 x 33 cm
  • Weight: 5 lbs. or 2.3 kg
  • Accessories Available from Com-Power for setting test:
  • levels and running the test
  • ADA-M125E shorting adapters
  • ADA-515-2 150 Ω to 50 Ω adaptersTEP-050 50 Ω Terminator
  • ATTN-6-100W Power Attenuator
  • DCU-300-100W Directional Coupler
  • ASC series Power Amplifiers


 


COM-POWER CORPORATION
X